 |
|||||||||
| MONDO*DR: PRODUCT NEWSLETTER  |
|
||||||||
 |
Antari: F-7 SMAZE F-7 SMAZE from Antari can be switched between fogger and hazer mode, with a haze output four times bigger than that of the F-5 haze machine. Whether in fogger or hazer mode, the output of fog / haze now can be spread further using the attached fan with nine adjustable angles. W-DMX by Wireless Solution is added as standard equipment so that cable management issues can be avoided. High-quality flight case and heavy-duty wheels make F-7 SMAZE perfect for tough conditions. |
||||||||
 |
|||||||||
 |
Sommer Cable: Hicon Connectors The new HICON BNC-HD connector from Sommer Cable, for digital serial video transmission, is technically rated at the highest level. The contact pin has a special volute bevel on the inside to lock the conductor after the crimping ensuring an excellent bond. The gold-plating and the axial contact pressure guarantee thousands of plug cycles and withstand the most adverse conditions and temperature differences, as they often prevail outdoors or in the broadcast field transmission.The connector is delivered for the following cable types: 0.6/.8, 0.8/3.7, 1.2/5.0 and 1.6/7.3. Custom-made versions are available on request. |
||||||||
|
|||||||||
 |
ADJ: Event Bar Pro The ADJ Event Bar Pro offers powerful, sharp white beams of light and is powered by four 10W white LEDs. This four-head pinspot system produces small 3º beams from built-in programs. Users may also individually program each head's movements with a DMX controller, which are sold separately. The Event Bar Pro is a versatile fixture that may be used to spot tables, décor and retail environments, or used as a special effect light at nightclubs. The Event Bar Pro’s base has built-in DMX In / Out, IEC power In / Out connectors, a four-button DMX digital display, built-in microphone for sound activation and ¼-inch input for ADJ easy-to-use UC3 controller. There is also a built-in mount to hang the Event Bar Pro on a tripod stand. |
||||||||
|
|||||||||
 |
Robe: DigitalSpot 7100 The DigitalSpot 7100 DT digital moving light projector uses LCD and LED technology and offers amazing digital gobo effects and the projection of highly saturated colours - all in a single moving light fixture. The DigitalSpot 7100 DT emits 7.000 ANSI lumens from a single 330W projection lamp with a contrast ratio of 3,000:1. Each of its two LED modules consists of 48 Luxeon Rebel RGBW LEDs and provides an extremely bright light output across the full colour spectrum. It offers DVI input and SDI input / output and is an ideal tool for all professional entertainment and leisure applications including corporate events, concert touring, TV and theatres. |
||||||||
|
|||||||||
 |
Green Hippo: Hippotizer Chipmunk Voted Live Design’s Projection Product of the year 2013-2014, the Hippotizer Chipmunk, is the latest addition to Green Hippo’s Hippotizer media server range. Driven by the same acclaimed software engine that powers the entire range, Chipmunk delivers two layers of 1080p HD with ease as well as full on-layer geometry, FX and colour control plus keystone correction. Timeline functionality is as per Chipmunk’s siblings along with RegionMapper, Preset Manager, ScreenWarp and many more of the components Hippotizer users have come to expect. The ability to switch to a single layer with cross-fade opens up a host of possibilities for Chipmunk. With a selection of transitions and mixer style functions built in, the system is ideal for on the fly applications such as music events, nightclubs and permanent installations. Hippotizer Chipmunk can be further configured to perform advanced functionality through a series of additional software packages that can be purchased at any time. |
||||||||
|
|||||||||
 |
Infinite Systems: Hybrid Array 4-Way Dance Top Infinite Systems has utilised its decades of experience in audio integration in nightclubs to bring the industry its flagship product - the Infinite Hybrid Array 4-Way Dance Top, which embodies the company’s philosophy for quality reproduction of the EDM genre. Using high quality components, each bandpass is addressed by a correctly proportioned sub-system, to produce a product specifically designed for the nightclub dance sector. Each trapezoidal enclosure is crafted from MDF to minimise resonance. Beginning with the dual high output neodymium 15-inch low-frequency transducers loaded into a foam injected horn mouth for maximised efficiency and impact. A separate trapezoidal partitioned sub-enclosure vertically arrays four neodymium 6.5-inch mid-range transducers assuring high directivity, clarity and redundancy. A 90 by 60 constant directivity aluminum high-frequency horn is coupled to a rare four-inch voice coil beryllium diaphragm neodymium compression driver. Very high frequencies are handled by dual, redundant high-output ring radiators for high-frequency extension. A captive factory installed adjustable rigging assembly contributes to safe overhead suspension. |
||||||||
|
|||||||||
 |
Fohhn Audio : Airea Series The Airea system is an intelligent, active loudspeaker concept and a versatile digital audio network system, for high quality and flexible sound reinforcement applications. It comprises state-of-the-art loudspeakers with integrated digital amplifiers and DSP technology, plus a master module with digital in and outputs. This master module provides the power, digital audio signal and control information for all connected loudspeakers. Simply wired using one single standard network cable (CAT-5) up to 32 active loudspeakers can be used with one master module. The signal path is fully digital throughout the entire Airea system, which prevents any reduction in audio quality due to AD / DA conversion or distribution loss. Using Fohhn Audio Soft software, every single loudspeaker can be individually controlled and its routing, level, sound and dynamic settings separately adjusted. Third-party converters enable the simple connection of analogue audio sources and provide a solution for connecting to digital audio protocols including MADI, CobraNet, Dante or Ethersound. |
||||||||
|
|||||||||
 |
PR Lighting : XLED 2007 Beam The XLED 2007 Beam uses the Osram Ostar (LE RTDUW S2W), rated at 15W with four-in-one LED colour mixing. Each fixture houses seven of these light sources rated at 50,000 hours lamp life and has a power consumption of just 120W and 220V. Offering pixel control in the form of 2-2-2-1 and a head movement of 720° (pan) or endless, and 270° (tilt) or endless with a pan / tilt swap and invert function, auto-position correction and magnetic sensor positioning. Colour mixing is RGBW linear (with macro), with linear colour temperature correction from 2,700K to 10,000K. There is 0-100% linearly adjustable dimming, electronic strobe (0-25 fps) and a lens angle of 6°. Other functions of this DMX-controllable fixture include touch button; LCD display, brightness and contrast adjustable; sound operation under self-test mode; optional wireless control; adjustable pan and tilt speeds and over temperature protection. |
||||||||
|
|||||||||
 |
Allen & Heath: XONE:K1 The Xone:K1 extends the MIDI controller range of Allen & Heath’s Xone DJ line, joining the Xone:K2 controller. The K1 has a flexible layout allowing users to define and customise an individual workflow and mixing experience and works with all leading DJ software. Easily configurable to allow fast access for setting levels, triggering hot cues, adding effects and instant looping to relieve the DJ from focusing on the computer screen, it features six endless rotary encoders with push switch, 12 analogue pots, four linear faders and 30 backlit performance switches with three-colour illumination. It also allows comprehensive mapping to leading DJ and production software, such as Traktor Pro, Ableton, Virtual DJ and MixVibes, offering a total of 52 assignable hardware controls. Powered over USB so that a separate power cable isn’t needed, Xone:K1 can be mixed n’ matched with other Xone:K series controllers and daisy-chained using Allen & Heath’s proprietary X:LINK protocol without the need to carry a separate USB hub. X:LINK also enables DJs to expand their set-up by connecting directly to Allen & Heath’s Xone 23C, DB2 and DB4 mixers. |
||||||||
|
|||||||||
 |
Adamson Systems: E219 Subwoofer Adamson’s E219 subwoofer joins the Energia family of loudspeakers - the E15, E12 and E218 - to drive the low end of demanding music genres and is loaded with two lightweight, long excursion 19-inch SD19 kevlar neodymium drivers utilising Adamson’s Advanced Cone Architecture. The drivers employ dual five-inch voice coils for exceptional power handling, and are mounted in an ultra-efficient front-loaded enclosure, designed to reproduce clean, musical low frequency information. A tangential flow venting system reduces harmonic distortion by minimising air turbulence resulting in unsurpassed output and efficiency. The lightweight E219 lends itself to rigging situations that benefit from flying subwoofers and it is designed to be used as a standalone low frequency component in the Energia system, but can also be combined with the E218 cabinet for larger events. The subwoofer is specified for use and packaged with the Lab.gruppen PLM 20000Q amplifier. Four E219 cabinets can be run from a single amplifier. Integrated rigging permits a 0° or 3° angle which allows for compatibility with the full-range line array modules in the Energia system. |
||||||||
 |
|||||||||
